LAMP METAL HALIDE BT56 BASE EX39 1000W 3500K CLEAR

41433 - MPR1000/VBU/HO/O
GE Protected Multi-Vapor® Quartz Metal Halide BT56

GENERAL CHARACTERISTICS
Lamp Type High Intensity Discharge - Quartz Metal Halide
Bulb BT56
Base Mogul Screw (EX39)
Bulb Finish Clear
Rated Life (NOM) 12000.0 h
Bulb Material Hard glass
Lamp Enclosure Type (LET) Open or enclosed fixtures
Mercury Content (NOM) 144.9 mg
Picograms of Mercury (NOM) 136.4 pg

PHOTOMETRIC CHARACTERISTICS
Initial Lumens (NOM) 110000.0
Mean Lumens (NOM) 88500.0
Nominal Initial Lumens per Watt (NOM) 110.0
Color Temperature (NOM) 3500.0 K
Color Rendering Index (CRI) (NOM) 65.0

ELECTRICAL CHARACTERISTICS
Wattage (NOM) 1000.0
Burn Position Vertical base up ±15º
Warm Up Time to 90% (MIN) 2.0 min
Warm Up Time to 90% (MAX) 5.0 min
Hot Restart Time to 90% (MIN) 10.0 min
Hot Restart Time to 90% (MAX) 15.0 min

DIMENSIONS
Maximum Overall Length (MOL) (NOM) 15.370 in(390.4 mm)
Nominal Length (NOM) 15.370 in(390.4 mm)
Bulb Diameter (DIA) (NOM) 7.000 in(177.8 mm)
Light Center Length (LCL) (NOM) 9.500 in(241.3 mm)

PRODUCT INFORMATION
Product Code 41433
Description MPR1000/VBU/HO/O
ANSI Code M47
Standard Package Case
Standard Package GTIN 10043168414330
Standard Package Quantity 6
Sales Unit Unit
No Of Items Per Sales Unit 1
No Of Items Per Standard Package 6
UPC 043168414333

CAUTIONS & WARNINGS
R- WARNING: This lamp can cause serious skin burn and eye inflammation from shortwave ultraviolet radiation if outer envelope of the lamp is broken or punctured, and the arc tube continues to operate. Do not use where people will remain for more than a few minutes unless adequate shielding or other safety precautions are used. Certain types of lamps that will automatically extinguish when the outer envelope is broken or punctured are commercially available. Visit the FDA website for more information: http://www.fda.gov/cdrh/radhealth/products/ urburns.html

Caution
• Lamp may shatter and cause injury if broken
- Dispose of lamp in a closed container.
- Do not use excessive force when installing lamp.
- Do not use lamp if outer glass is scratched or broken.

Warning
• Unexpected lamp rupture may cause injury, fire, or property damage
- Do not exceed rated voltage.
- Do not store flammable materials near/below lamp.
- Do not turn on lamp until fully installed.
- Do not use beyond rated life.
- Do not use lamp if outer glass is scratched or broken.
- Do not use where directly exposed to water or outdoors without an enclosed fixture.
- If used on a dimming system, see instructions.
- Operate lamp only in specified position.
- Turn lamp off at least once for 15 minutes per week. FAILURE TO COMPLY INCREASES THE RISK OF RUPTURE.
- Use only properly rated ballast.
• A damaged lamp emits UV radiation which may cause eye/skin injury
- Turn power off if glass bulb is broken. Remove and dispose of lamp.

• Risk of Burn
- Allow lamp to cool before handling.
- Do not turn on lamp until fully installed.
• Risk of Electric Shock
- Do not use where directly exposed to water or outdoors without an enclosed fixture.
- Turn power off before inspection, installation or removal.

• Risk of Fire
- Keep combustible materials away from lamp.
- Use in fixture rated for this product.